Tile and Grout Cleaning
Shower and Bathroom Tile Restoration
Removing limescale, soap scum and mould from shower walls, trays, bath surrounds and grout, and advising on silicone that needs replacing.

What's involved
Shower tiles suffer from three separate problems: limescale from hard water, soap scum from shampoo and body wash, and mould in grout and silicone where water sits. The specialist starts with a descaler suited to the tile, using acid-based products only on glazed ceramic and porcelain, never on marble, limestone or travertine, which acid etches. Soap scum is dissolved with an alkaline cleaner, and tiles are scrubbed with non-scratch pads. Grout lines are scrubbed with a narrow brush, and mould is treated with a mould remover left to work for the stated contact time. Everything is rinsed and dried. Black mould that has grown deep into silicone sealant cannot be cleaned out, so the specialist will recommend removing and replacing it, which can be done the same day. A typical shower enclosure takes one and a half to two and a half hours. Avoid using the shower for a few hours afterwards.
How we handle it
Tell us about your tiles
Use the quote form to tell us the type of tile, where it is, roughly how many square metres, and what the problem is, such as dirty grout, limescale or worn stone. Clear photos of the worst areas help us quote accurately.
Receive a clear price
We send a fixed price for cleaning and any sealing, colour sealing, regrouting or stone restoration. If the tile type is unclear, the specialist may test a small area first.
Prepare the room
Move furniture, rugs and loose items off the floor and out of the shower. Make sure there is water and power nearby and parking close by for the machine and equipment.
Cleaning and treatment
The specialist cleans with products matched to the tile, scrubs grout lines by machine or hand and extracts the dirty solution. Sealing or regrouting follows once surfaces are fully dry.
Aftercare advice
You get a walk-through of the finished surface and advice on drying times, how long to wait before mopping or showering, and which cleaning products to use so the sealer lasts.
Price guide
Tile and grout cleaning is usually priced per square metre for floors and per enclosure for showers, depending on the tile type, how dirty the grout is and whether sealing or colour sealing is added. Natural stone and Victorian tiles take more time and care. A minimum charge often applies to small jobs. We give a fixed price after seeing photos.
- Ceramic or porcelain floor deep clean: £4–£8 per m². Machine clean, grout scrub and extraction; minimum charge usually around £120.
- Victorian hallway tile restoration: from £350. Stripping old coatings, deep cleaning and breathable sealing of a typical hallway.
- Natural stone clean and seal: £10–£25 per m². Stone-safe cleaning, honing where needed and impregnating sealer.
Questions about shower and bathroom tile restoration
Can I use vinegar on tiles?
Vinegar can be used occasionally on glazed ceramic and porcelain tiles, but it should never be used on natural stone such as marble, limestone or travertine, because the acid etches the surface. Regular use of vinegar can also degrade cement-based grout over time. A pH-neutral tile cleaner is safer for routine cleaning.
How often should grout be sealed?
Grout in busy floors and showers usually benefits from resealing every one to three years, depending on traffic, cleaning products and the sealer used. A simple test is to drip water on the grout: if it darkens and soaks in quickly, the sealer has worn off. Colour sealed grout generally lasts longer.
What is grout colour sealing?
Grout colour sealing is a coating brushed into grout lines after cleaning that bonds to the grout, covers stains and seals it at the same time. It gives a uniform colour across the floor or wall and comes in a range of shades. It is a practical alternative to regrouting where grout is sound but permanently discoloured.
Other services
Tiled Floor Deep Clean
Machine cleaning of ceramic and porcelain floors and their grout lines, removing embedded dirt and grease that mopping leaves behind.
Grout Sealing and Colour Sealing
Sealing clean grout to slow future staining, or applying a colour sealant that gives stained or patchy grout a uniform, like-new finish.
Natural Stone Cleaning and Sealing
Cleaning and resealing limestone, travertine, marble, slate and sandstone floors with stone-safe products, including honing worn or etched areas.
Victorian and Quarry Tile Restoration
Careful cleaning and restoration of original Victorian geometric, encaustic and quarry tile floors in hallways, porches and kitchens.
Regrouting and Silicone Replacement
Raking out and replacing cracked, crumbling or badly stained grout, and stripping and renewing mouldy silicone around baths, showers and sinks.
Shower and Bathroom Tile Restoration near you
Get a free tile and grout cleaning quote
Tell us what you need and we'll come back with a clear price.
Request a quote