Tile and Grout Cleaning
Tiled Floor Deep Clean
Machine cleaning of ceramic and porcelain floors and their grout lines, removing embedded dirt and grease that mopping leaves behind.

What's involved
The floor is vacuumed first to remove loose grit. An alkaline tile and grout cleaner is applied and left to dwell for several minutes to break down grease and soil, which is especially important in kitchens. Grout lines are then agitated with a stiff grout brush or a rotary machine fitted with a scrubbing brush, which works the cleaner into the pores of the grout. The dirty solution is rinsed and extracted with a hot water extraction tool or wet vacuum, so dirt is lifted away rather than spread around. Edges and corners are scrubbed by hand. Heavily soiled floors may need two passes. The floor is then rinsed with clean water to remove residue, which would otherwise attract dirt. Most floors are walkable in socks after an hour and fully dry in two to three. Allow roughly one hour per 10 to 15 square metres. Clear furniture and rugs from the floor beforehand.
How we handle it
Tell us about your tiles
Use the quote form to tell us the type of tile, where it is, roughly how many square metres, and what the problem is, such as dirty grout, limescale or worn stone. Clear photos of the worst areas help us quote accurately.
Receive a clear price
We send a fixed price for cleaning and any sealing, colour sealing, regrouting or stone restoration. If the tile type is unclear, the specialist may test a small area first.
Prepare the room
Move furniture, rugs and loose items off the floor and out of the shower. Make sure there is water and power nearby and parking close by for the machine and equipment.
Cleaning and treatment
The specialist cleans with products matched to the tile, scrubs grout lines by machine or hand and extracts the dirty solution. Sealing or regrouting follows once surfaces are fully dry.
Aftercare advice
You get a walk-through of the finished surface and advice on drying times, how long to wait before mopping or showering, and which cleaning products to use so the sealer lasts.
Price guide
Tile and grout cleaning is usually priced per square metre for floors and per enclosure for showers, depending on the tile type, how dirty the grout is and whether sealing or colour sealing is added. Natural stone and Victorian tiles take more time and care. A minimum charge often applies to small jobs. We give a fixed price after seeing photos.
- Shower enclosure clean: £90–£160. Limescale, soap scum and grout mould treated on walls, tray and screen.
- Ceramic or porcelain floor deep clean: £4–£8 per m². Machine clean, grout scrub and extraction; minimum charge usually around £120.
- Victorian hallway tile restoration: from £350. Stripping old coatings, deep cleaning and breathable sealing of a typical hallway.
Questions about tiled floor deep clean
How much does professional tile and grout cleaning cost?
Professional tile and grout cleaning in the UK typically costs £4 to £8 per square metre for ceramic or porcelain floors, with a minimum charge of around £120. Shower enclosures usually cost £90 to £160. Grout colour sealing is about £8 to £15 per square metre, and natural stone cleaning and sealing £10 to £25 per square metre.
Can dirty grout be cleaned or does it need replacing?
Most dirty grout can be cleaned rather than replaced. A professional deep clean with alkaline cleaner, scrubbing and extraction removes the majority of embedded dirt. If grout is permanently stained, colour sealing gives a uniform finish. Only cracked, crumbling or missing grout needs raking out and replacing.
Does steam cleaning work on grout?
Steam cleaning can loosen surface dirt on grout, but on its own it rarely removes deeply embedded soil and can push dirty moisture further into unsealed grout. It also risks damaging some sealers and natural stone. Professional cleaning combines chemical dwell time, scrubbing and extraction, which lifts dirt out of the grout.
Other services
Shower and Bathroom Tile Restoration
Removing limescale, soap scum and mould from shower walls, trays, bath surrounds and grout, and advising on silicone that needs replacing.
Grout Sealing and Colour Sealing
Sealing clean grout to slow future staining, or applying a colour sealant that gives stained or patchy grout a uniform, like-new finish.
Natural Stone Cleaning and Sealing
Cleaning and resealing limestone, travertine, marble, slate and sandstone floors with stone-safe products, including honing worn or etched areas.
Victorian and Quarry Tile Restoration
Careful cleaning and restoration of original Victorian geometric, encaustic and quarry tile floors in hallways, porches and kitchens.
Regrouting and Silicone Replacement
Raking out and replacing cracked, crumbling or badly stained grout, and stripping and renewing mouldy silicone around baths, showers and sinks.
Tiled Floor Deep Clean near you
Get a free tile and grout cleaning quote
Tell us what you need and we'll come back with a clear price.
Request a quote